LED General Lighting

LED General Lighting

LED's are becoming the preferred lighting technology in the industrial, office, and residential segments not only due to their high efficiency but also because they enable smarter lighting systems. Analog Devices is driving advanced features and high performance in the next generation of intelligent lighting systems with its portfolio of lighting IC products which include wireless solutions, LED drivers, intelligent occupancy sensors/DSPs, and energy measurement.

For support contact us at lighting@analog.com

Please click on "enlarge" on the signal chains below to see the recommended ADI parts.

Smart Lighting System

DC Voltage System

Isolated AC/DC Multi-String System

High Power Digital System

MR16 System

Recommended Products

Wireless:
  • ADF7023: High Performance, Low Power, ISM Band FSK/GFSK/OOK/MSK/GMSK Transceiver IC
  • ADF7021: High Performance Narrowband ISM Transceiver IC
  • ADF7242: Low Power IEEE 802.15.4/Proprietary GFSK/FSK Zero-IF 2.4 GHz Transceiver IC
  • ADuCRF101: Precision Analog Microcontroller ARM Cortex M3 with ISM band Transceiver

Intelligent Occupancy Sensors:
Energy Metering and Monitoring:
  • ADE7953: Single Phase Multifunction Metering IC with Neutral Current Measurement
  • ADE7816: Six Current, One voltage Channel Energy Metering IC

LED Drivers:
  • ADP8140: 4 Channel High Current LED Driver with Adaptable Power Control
  • ADP2384: 20 V, 4 A, Synchronous Step-Down DC-to-DC Regulator
  • ADP2386: 20 V, 6 A, Synchronous Step-Down DC-to-DC Regulator
  • ADP2441: 36 V,1 A, Synchronous, Step-Down DC-DC Regulator
  • ADD5211: Four-String, White LED Driver for LCD Backlight Applications
  • ADD5203: 8-String, White LED Driver with SMBus and PWM Input for LCD Backlight Applications
Backlighting and Flash Products Portfolio

Digital Power:
  • ADP1046: Digital Controller for Isolated Power Supply Applications
  • ADP1047: Digital Power Factor Correction Controller with accurate AC Power Metering

   iCouplers/Wired Interfaces:
  • ADM485E: 5 V, ±15 kV ESD Protected, Half Duplex RS-485/RS-422 Transceiver (2.5 Mbps)
  • ADM2582E: 2.5 kV Signal and Power Isolated, ±15 kV ESD Protected, Full/Half Duplex RS-485 Transceiver (16Mbps)
  • ADM2587E: 2.5 kV Signal and Power Isolated, ±15 kV ESD Protected, Full/Half Duplex RS-485 Transceiver (500kbps)
  • ADM3251E: Isolated Single Channel RS-232 Line Driver/Receiver
  • ADuM1300: Triple-Channel Digital Isolator
  • ADuM1410: Quad-Channel Digital Isolators
  • ADuM7640: 1 kV RMS Six-Channel Digital Isolators (6/0 Channel Directionality)
  • ADuM5240: Dual-Channel Isolators with isoPower® Integrated DC/DC Converter, 50 mW (2/0 channel directionality)

General Power Management:
  • ADP2441: 36 V,1 A, Synchronous, Step-Down DC-DC Regulator
  • ADP121: 150 mA, Low Quiescent Current, CMOS Linear Regulator in 5-Lead TSOT or 4-Ball WLCSP

Sensors:
  • ADT7420: ±0.25°C Accurate, 16-Bit Digital I2C Temperature Sensor
  • ADT75: ±1°C Accurate, 12-Bit Digital Temperature Sensor
  • ADXL362: Micropower, 3-Axis, ±2 g/±4 g/±8 g Digital Output MEMS Accelerometer
  • ADMP441: Omnidirectional Microphone with Bottom Port and I2S Digital Output
  • AD7151: Ultra-Low Power, 1-Channel, Capacitance Converter for Proximity Sensing

The Internet of Things (a WSN from Analog Devices)

The Internet of Things (IoT), with IP smart objects is gaining popularity in the wireless sensor network world. Featured is the ADuCRF101-based low power IPv6 Wireless Sensor Network demo system.

Industrial LED Lighting Solutions from Analog Devices

This video shows several new ADI driver products used for driving industrial LED luminaires. ADI’s LED drivers offer flexible designs, advanced features, and high efficiency to meet the industrial lighting challenges.

Send Feedback X

Send Feedback

Close